However, the manufacturer could improve a few things, the meaning of which is not open to me.
Light: When you turn the thermometer will beep, the user or The woman now knows the thermometer is ready sounds. At the same time the light goes on, that's ok, though a bit superfluous. I would but I prefer something desired an extra button or in the way with which you can turn on the light after measuring. So it does not really help me.
The beeping: Measure Within a few seconds a beep will sound 4 times. What is this I do not know, because according to manual that comes, to the basal body temperature min. 5 min. To measure. And indeed: The value of the beeping is substantially lower than for 3 to 5 minutes. If Geratherm already wrote this note in the instructions, why is the thermometer then programmed ??? It would be a signal for 3-5 min. Or if there is no temperature rise much more sense.
When you save the values was thought along. It stores the last 10 measurements. This in turn makes sense, because you can not turn on the light to the temerature read when it is extinguished before the fairs. So you can look later.
The direct succession took place with the different readings when measuring I can not confirm. Fair I every time exactly the same length, the temperature is right about the same. In my case it deviates by only 1.2 hundredths. I think that's fine.
After the beep, which is to indicate the upper range, continues to measure the thermometer. I could find the following: It measures a minute, then it will continue to measure and display the values, if the temperature rise is greater than x ° C within a specified time period. After 9 minutes, it switches itself off.
Conclusion: 1.2 Geratherm things could be improved. Basically, the thermometer is working very well. I am happy in spite of these criticisms, and would recommend it in good conscience.