A first Ausprobe at the Bad bare wall showed that it is quite useful, if I only hanged a matching canvas and me doing some thinking about setting up the unit. Because the distance from the wall I do not get out with the existing furniture. The 40 "flat screen should still be used, so the screen varies with operating the projector in front of this decrease. Due to the fact the wall distance is rechlich, so I really have to make a table in front of my TV stand. Did what zusammengeschreinert myself and so a viable solution found.
So projected on the screen and that makes, here the quality and freedom from folds of the canvas is crucial, a very good impression. I just opted for 87 "diagonal screen and a 16: 9 buy, knowing that the projector has native namely 16:10, but yes in 4: 3 and 16: 9 can scale.
2D movies, sports and games from the Xbox 360 look good.
The pitfalls of the device were visible when I wanted to bring 3D glasses, 3D Bluray player and my existing 3D Bluray up and running.
Namely, since no way around it, which has the support probably also rather unexpectedly, as for me as well, so confirmed that the projector does not scale in 3D setting. From its native 1280x800 pixels Aufllösung no way towards the 16: 9 format. That will not change with a new Firm Had since the hardware limits the.
Now, one could draw the conclusion that the canvas is incorrectly selected.
For my purpose in a home theater screen with 16:10 format is somehow out of place. In this format, there is not a single feature film. Therefore it is obvious, 16: 9 to choose to have a black border as for better contrast and image statements on the edge.
The manual of the equipment makes for 3D no restrictions when it comes to the aspect ratio. That I in the menu 16: 9 select them, zoom or original example, has no effect on the shown.
Either the image on my screen is too high or not wide enough, if I shorten the distance from the projector to the screen, so that it fits the top and bottom in the screen, thanks to the 16:10 format precisely.
It goes well as long as the film in the format 1: 2.40 (also known as 21: 9 known) is present, then you can exploit the width of the screen without project the image in height beyond the canvas. Format Filling 16: 9 requires an intervention here, if you want to watch 3D.
When wide picture of the area remains as black as it can be interpreted as the black Beamer precisely. It comes just a bit of light there.
Also you would have to say that although it does not lead to excessively large projection, but strictly speaking, the format is not einggehalten and a circle is drawn, for example, in height. In what one really recognizes and that is relevant to the individual when 3D movie / game, everyone must decide for themselves.
If I have the choice and value put on perfect 3D movie experience, then this projector is probably the wrong choice here.
From the ease of installation of the device, I could convince myself. However, he must have been standing straight. About Focus and Keystone can be a slight tilt forward or back to compensate, but it tilts to the left or right, it is really nothing. That the device can not compensate for, because there is no lens shift.
The sound is really okay. Miracle need not expect, but it sounds better than it hinbekommt many handeslüblicher TV. And quietly he is, that's truly amazing.
I have good 2.50m distance from the screen, the projector is virtually close to me and yet the fan noise does not fall to negative.
2D is really good. But if I continue to 3D Ausrüste or not but rather consume only 2D movies in the future, I need to see. Since I do not yet committed.
I think I'll still keep him despite the weaknesses in 3D and use, even for 3D. Luckily, there are the films partly in rental, so I will not have to buy compulsory to see the 3D version can.
