A few days ago, it was time and my daughter was finally able to unpack and try the wave board. Since she had already practiced driving productive in girlfriends, she came to the board and cope immediately. She went so much in the last few days. Tonight she complained that something was loose.
I have it actually even looked alike. Two loose screws I could quite easily tighten using the supplied Allen key.
The main problem was that the front wheel herumschlackerte lawless. This problem, however, was not so easily solved. A manual is not supplied, where possibly a proposed solution could be found. I have the Board then looked at a closer look and then have solved about 10 screws on the back, so you can remove the black and white floor panel on the front. Now also became obvious why the wheel schlackerte. These screw had come loose massively. With a pump pliers I put the screw (a suitable wrench I had unfortunately not on hand). Then I screwed the base plate again. Unfortunately, these bolts but do not appear for the repeated loosening and tightening suitable to be back, as you now the screws can no longer tighten properly. Following repair, you should be sure to wash your hands!
I am now eager to see whether the screws now stay longer fixed and if not, whether the base plate can screw right again at the next repair.
In the product description is:
"IMPORTANT: This board is of high quality and definitely not cheap Board"
This I can not understand:
-The mentioned screws would not be allowed to resolve after a few days use either the screws were not tightened properly or there is a design flaw that loosen the screws regularly
-having a high quality, I understand that even high-quality materials are used, but the unpleasant odor testifies hereof very little
-The screw the base plate can probably not frequent repair to (even if the loose screws should be an individual case, perhaps you have even change a wheel, then you would run into the same problem)
Positive I can evaluate the other is my daughter very happy with the Board.