The barn has 7 opposite parking boxes with sliding doors and corresponding feed boxes that are beautiful pushed through the doors, as well as a storage area for straw, fodder etc ... At the end faces are each two beautiful swinging doors through which the horses behaved in the barn can be.
The fact that the roof can be folded in half, can be played with all the boxes in the stall.
Doors and windows are open and all total and I'm quite fond of this toy.
Included is a little glue for mounting and accurately counted screws -> so do not waste ;-)!
A small Phillips screwdriver is needed, possibly small clamps or rubber bands to hold the adhesive bonds.
BUT:
What is included on glue is a joke, here you should also order a bottle of wood glue urgently. The installation instructions are really very scarce, here you should definitely include the photo on the package to help with - so do not throw away the same.
The pilot holes for the barn walls are not particularly fit, so unfortunately some parts are wrong. If you want to drill new holes, they just have no other option. Some of the holes are not deep enough, which is why you can not tighten the screws. One or the other wall ruptures by the screws - are just only 6 mm thick MDF plates that are covered with wooden decorative films, then outside in brick look. Especially at the edges of the outer film dissolves already. Here you should rectify the same. This should have handwerlich really can do better - a pity!
Therefore 2 star deduction in the overall standings.
