Best saw the market .......

I got the saw to my 40th, during renovation work on my garden house I have often cursed than mene decrepit jigsaw what mneine friends took the opportunity to give me a reasonable saw. I had always indicated that my GST 140 CE liked a lot and I'm going to buy myself this because I have had very good experiences with the dual role of leadership. But I have been given now the 160er.

While the saw is actually too late to the wooden floor in a round room is laid out, but I still have plenty of applications, the so justify quality saw. My experience so far in detail:

1 Engine performance: The saw runs surprisingly quiet and vibration-free, you do not trust her to, which lie dormant in their power reserves. I have 50 mm oak panels cut with a circular saw in 30cm strips and mixed with Lamellos glued because I have built a semicircular bar. The machine performance is easily sufficient to fully entspamnnt the round contour of the surface scratch entlag to cut into the glued oak panel. The saw has sufficient weight so as not to fall into trouble. A 800 Watt saw must have a certain weight, so it can be applied cleanly. Because of the power the saw also requires a firm hand to guide, if you sawed radii. Power, running smoothness and noise level are absolutely great, because there is hardly anything comparable on the market.
2. Sägeblatführung and Winklingkeit:
Provided you use the right music and use of materials setting during a power swing and strokes you will be rewarded with absolute angular cuts. The harder the material to be cut, the shorter it should turn out the pendulum and possibly also the number of strokes are reduced. By constant electronics power the saw remains. 50mm oak can and should not be so aggressive as 25mm spruce zersäbeln, in Quietly powerful one. The best times to make a few test cuts and find the optimal setting. The rigid double roller guide then makes a superb job, large radii go top, tight radii go somewhat bulky and the saw comes a not so handy before that lies at the better management and the associated increased Steiffigkeit and is pure matter of habit. Conclusion: Mti hardly saw another are so angular and controlled cuts possible, very well resolved.
3. feel and operation:
The device makes a high impression, and fits snugly in the hand. Since classified by some as high weight should be. The saw hatt enormous 800 watts of power and is konsturiert consuming. The weight contributes as already mentioned also for calming the saw, especially with plunge cuts I feel balance and weight helpful. The switches are all easily accessible rest tired one, you should not have to little hands when the one-hand operation to fold well. For me perfectly arranged. Unlike the GST 140 CE I know the blade is not ejected in a high arc, but will be seen moving the lever in the recording and will have to solve through. I only thought they maybe could shake out, but the infected usually overtighten it. I find nevertheless very well resolved, the whole mechanism works extremely solid. The complete blade change is solved here really perfect. The recessed stroke rate is anyway a good thing, since you moved nothing accidentally. 4m supple rubber cable and restart protection, the saw is disconnected from eingeschlatet Netzt or accidentally been pushed the switch to "I" before power connection, the saw when connecting to the power grid is made, complete the equipment.
4. lighting, suction, splintering:
Lighting with two bright "wamrweiß" LEDs is top. The cutting area is really lit perfect, glare-free, which can no Saw better. Point. The suction in combination with the transparent cap make a reasonable extraction possible. Annoying, as with all Boscch devices, the diameter of Absaugadapters goes with Protool / Festool sucker together not because you have to have so postpone a rubber sleeve, and only then does that. However, the visibility suffers when using very fine Clean Cut leaves hard woods are cut, the fine dust which arises because settles and hampered by little visibility, but this is a universal problem that occurs with each saw. I luckily have a compressor in the workshop and can sometimes just take the blow gun and the visibility is good again. Splintering device is actually a joke, because I would have liked a little more solid part of who it lets in the curve sections, it may dispose of the same, since the slot is naturally in no time getting wider. Although the cost nothing, but when good edge necessary because visible, then you take better a sharp Clean Cut sheet and finished.

Conclusion:
You get here a very strong and precise sawing at the hand that is reasonably equipped and a very broad range of offers. For the very young there are better things saws, for the absolute opportunity yourselfer also, which is a variant bracket and throttle grip probably safer on the road. But anyone who regularly works with the tool and has become accustomed to his peculiarities, which it no longer exists here. Wants Like I said, the saw has power, weight and precision, the modellers of 4mm plywood snip is for the wrong addressee, but who exact saw for rapid work professionally or want semiprifessionell in higher material thicknesses is at the right place. No craft or Anfängersäge, the ambitious users, however, have some fun with it.