I chose this wall mount to fix my very narrow and high ratio of satellite WS201 Nubert. The holder was one of the few who could match the narrow width. I had in mind only what function affects the stability of the pure "Terminal" - but was completely unfounded ... The installation was relatively simple - here I had great horror of hours of drilling and correction arias. The holder carrier is naked against the wall, is then provided with aperture and a kind of "dish", the later the rotation and inclination ensures. Personally, I have only the standard anchor against Fischer Universal plug (with the border, which lies on the wall around the borehole) and exchanged and even secured even with twice 8mm (top and bottom) in the middle 6mm. This really keeps Bombenfest and I never had in mind that this bracket the max. 25 does not create ... Terminals work quite well and are having a continuous screw from the left and to the right. "Ultra Grip" is then probably this "special" foam, which is glued to the two clamping cheeks. Whether this really so "ultra" is sometimes debatable - he does definitely his service, holding my two relatively high LS very good and absolutely without wobbling. With the older rack boxes that I put again purely out of curiosity (which were almost twice as wide and significantly lower) - flipped it also very good. Conclusion: The wall bracket holds, what it promises. Sits even less fitting as specified bombproof and clamps the boxes perfectly. Rotating and tilting function also works. Not cheap, but well worth the money! Buy recommendation!