Although all the parts made of solid wood, but here too much was just saved. You can see through the thin white coating wood gluing of wood panels.
It is well to soft wood (pine?) 3rd and 4th choice. Several boards have profound impacts, poorly they were zugespachtelt makeshift with wood putty (color deviation).
At one bar, the coating from bursting, elsewhere in the paint. Some of which have been not really affected by the color.
One of the longer slats was visibly bent like a Flitzebogen, other twisted. A clear sign that for wet wood came for processing which, then
subsequently further dried and warps.
And very disturbing I found the processing.
Man, rather manufacturers! When tailoring wood elements, the saw should be sharp and produce a clean cut.
Frayed and rough cuts are also not nice when you painted over with paint.
In addition, you should drill the holes before painting so that the paint does not ausplatzt. And holes should go through and not
only drilled and the Bohrfransen clog the hole.
And the blind holes for the wooden dowels that someone bored with you free hand without end stop? It's stupid, when a 40mm dowel
disappears up to 5mm in a board and others are drilled only 15mm.
And wooden dowels incl. Their associated holes should also be used. Prodding is called for vigorous and fill with wood glue is announced.
Because either the anchor dropped from alone in the hole you had to drill or something.
Oh ... and the only way, there are 32 wooden dowels are needed, not 28 pieces, lest Just have your own description.
Good that I by another piece of furniture, a few had.
Conclusion, the thing was sent back. This bed is from the idea very nice, but unfortunately the quality fits neither of wood nor of
processing.
My recommendation - stay away!
