Rate negative I have, however, the much too small collecting container (you could leave out the not?), Because after the shredded material has passed through the roller, it passes on to a pile in the collection vessel and has it reaches a certain height, the roller takes the already shredded material back to the chopper and clogged. It should be noted here that this also happens when the collecting container is not yet fully long. Incidentally, this device must only be operated with the collector, because this a catch is mounted, the insertion of the container only after running the unit again. So if you want now shake the accumulated pile of something aside, one must first solve (rear of the unit), so that one can prefer something the collection container to distribute the mulch something the catch. Well ...
Supplied to the chopper larger shredded it can happen that easily bulky branches damage plastic inner sleeve ahead of the roll. In this way, I had recorded directly from first use a 2cm tear.
Since I need the chopper almost exclusively for larger quantities, the relatively small receptacle is unfortunately very troublesome. Fainthearted people should bear in mind also the high weight of the chopper of more than 30 kg. Fortunately, the manufacturers but has attached a handle and respective roles on the device.
For the container so a minus star and for the device to be four plus star
Rolling chopper should similar incidentally not for leaves, weeds, are used, since these only crush the shredded material, but not chop.