Class part, very stable and variable mounting quite simple
TecTake TV Tilting Wall Mount swivel max VESA 400x400 up to 100kg Plasma LCD LED 81cm (32 inches) for flat panel - 140cm (55 inches) distance from the wall 7cm (Electronics) 5
TecTake TV Tilting Wall Mount swivel max VESA 400x400 up to 100kg Plasma LCD LED 81cm (32 inches) for flat panel - 140cm (55 inches) distance from the wall 7cm (Electronics)
Have a Panasonic LED TV with 55 inches. The spacing of the mounting thread on the back is another 40 cm. In order for this wall mount fits just. The TV weighs no 25 kg. The wall bracket is up to 100 kg and is oversized because of her. Have not respected it when purchasing, but is not a problem. The wall mount is but very stable. Until one time the right places for the 4 holes in the wall calculated and measured has some time passes, but as soon as they are sometimes drilled, attaching the wall mount is very fast. However, I do not have to drill holes with 10 mm diameter as planned, but only 8 mm - seemed adequate for my television, and has also been proven so. The TV does to less than 10 cm zoom fold against the wall, but also more than 25 cm away from it. Incidentally, you must not worry if you are not 100% horizontally installing the wall mount, because you can then the TV in the wall bracket rotate a few degrees. (The supplied small spirit level is somehow crooked because of plastic.) And also tend the TV goes, if you install it exceeds or falls head. Conclusion: I'm totally satisfied.