November 8 in the morning: Many satellite stations I could receive in the evening without any problem yesterday morning report "No Signal", however, while some others can be received. All come from the same satellite dish / LNB same. It is annoying. A reboot does not alter. In this regard would be a signal strength indicator in the software helpful. Unfortunately, there is not!
November 11: The mystery clears. By chance, I found that the reception of certain channels (there are only n.tv, Euro News, SIXX, VOX, N24) is only possible if another receiver is on the upper floor. (This is a Hirschmann receiver which is completely autonomous from the Hauppauge Receiver connected to a quad LNB. So there is no splitter or distribution between the two). Instinctively, this issue therefore does not appear to be caused by the Hauppauge USB Receiver me. I will therefore on the Quad LNB konzentrieren.- However it should be noted that from my 3 receivers in the house (1x Hirschmann, 1x Samsung TV with an integrated receiver and 1x Hauppauge USB receiver) only the Hauppauge USB receiver these quirks has).
In sum there is a useful satellite experience on your PC, however, with very long switching times between channels often up to 3 seconds when switching even much longer.