Point 1: Volume
People, you never have a printer at home had? Obviously not. Because this printer is cheap compared to other printers as quiet / loud. There are no major differences here. Compared I have a multi-function device from HP and a normal printer from Brother. Both are from the same model year and both are just as loud.
Point 2: Use of Cheap cartridges
Many wrote that they were informed after inserting a cartridge low that it is not original ink Epson and every 8-10 days had to be changed then because the cartridges are no longer recognized.
Honestly, you have the printer at all are at home? When I set up the printer, I immediately clean the cheap cartridges to see what happens. And what happened? Nothing! There is not this message. The cartridges run with me for weeks without problems and without failure.
Point 3: speed under Wlan
Sometimes I really wonder what some people operate at home for a network. Because of course takes a scan 10 minutes if the printer has a poor connection to the router. I Access Points installed and can get from anywhere a scan in under a minute. So: Either expand the network in the home at a reasonable, or simply go directly to the PC via USB.
Point 4: Installation
Here I suffocate almost to my choker. Many "low Reviewer" really mean that you could install without a USB cable to the printer never ever and the establishment of the WLAN is extremely complicated. Hello? I declare the times for outsiders: The printer is turned on for the first time, then you judge him directly via the display and keys (language, time, date). The printer is set up in under a minute. If I want a wireless internet connectivity, click the WLAN button and judge me by selecting the correct wireless network a. How to set up the wireless network on smartphone etc.
Until that moment, the PC was not even on! Why a bitch is here written?
Item 5: Slate expression
How to start here very tenderly ... people, there is a slide that can be adjusted to the paper. Of course, the pressure comes out wrong when the paper is already wrong in the shaft.
Summary:
Normally my words rarely let such freedom, but here it was very important that customers are informed that the negative reviews are certainly just the result of ignorance and to some extent also from Faulhait. The unit runs fine. For a low budget printer may no longer want to be. Other manufacturers are much worse here.
