convenient for labeling at a reasonable price

Labeling cables is not so easy.
Stickers onto cables usually not long.
Labeled it the cable directly, the labels are hard to change.
Clips for marking the one hand, quite expensive, but you need to also have different sizes, since they must be suitable for the respective cable thickness. If the clip is too small, it will not fit onto the cable, it is too large, he squirms.

The cable tie solution in my opinion the following advantages:
.) Low
.) Slightly changed (by attaching a new cable tie; namely what costs, but much less than one clip)
.) Adaptable for all cable diameters
.) You can not only individual cables, but also cable bundle connected and label (as needed)
.), The cable can be labeled and simultaneously fixed
Slide.) No slipping of the label (cable clip or twist like if they do not fit perfectly to the cable)

Of course, the cable ties offered here also drawbacks
.) The solid end of the cable tie must be nipped off (Note: When pinching off can, if you are not careful, other cable between the tongs fall) + sharp corners remain at abgezwickten end usually consist
.) Of the locking mechanism is edged away from the cable. This can be annoying when pulling the cable through a cable duct.
.) The inscription field has a production-related small ridge that disrupts the Labeling in the middle. The production quality is definitely expandable
.) The best looking solution is not. Since the cable ties are very small, but they do not fall on