Cumbersome to install and of low durability

Even the application of the protective film is a medium-sized challenge. The actual protection film is sandwiched between two carrier films. After a thorough cleaning of the screen with the included handkerchief you have to pull off the backing sheet (page 1) and then align the screen protector on the display. This is only in a position, and during the subsequent smoothing with the included, very practical map, arising particularly for left-handed trouble. Indeed, it is a place in which you can touch the film without leaving permanent fingerprints, and this is in the top left corner. So you have to forcibly flatten the foil with your right hand, but it is with a bit of effort to create well to achieve a wrinkle and bubble free result. Only you have to pull off then the second, quite stiff carrier film from the surface. Here, the protective film in some places solves inevitably again, so that you again have a few small bubbles in the final result anyway.
If one uses his iPad with a sleeve (our can be very tight pull on the corners), the film dissolves also be at the edges slightly from that can not be avoided with the best intentions.
After a week of normal, almost daily use already has the protective film on quite wear, she has many dull areas, which no longer can be removed by cleaning. I think you do not have too long to enjoy this screen protection. The touch function of the iPad is a little affected, though not severely.
The included cleaning cloth corresponds to the quality and the size was a lens cloth, and you can make good use of all possible smooth surfaces as it cleans lint.
For 9.99 I do not exactly cheap feel this set, and there will be no need to buy the product for me.