I have the following hose, blowouts and tire inflator to buy, they not only fit perfectly from the terminals, are of high quality and harness the power of the compressor:
Hazet spiral hose, 9040-7
Hazet 2-way blow gun, 9040-4
Hazet 9041-1 tire inflating gauge
While the compressor is without accessories, but it needs some advance are assembled. The tool details were not quite right in the manual to do so.
That is best done down with the rubber feet. The fastest way is if you fixed the nut with a 13mm Schraubenschlüssle and firmly screwed on the screw Fußkopf with a 13 mm socket circuits.
When the wheels you're closer relations. The fastest we went with me to fix the nut in vicinity of the wheel with a wrench and the other counter-rotate with a bone. Interestingly, for fixing at a 15er, at the other a 16er wrench needed.
Then you can set the compressor and tackle the top additions.
With the small Imbusgewindeschrauben one squeezes the transport firmly on the guide on the pressure vessel.
Rear removed the plastic covers for oil filler and air filter connections.
The latter are by the thread a pretty fummlige matter.
Top Pressing the plastic inside, that the thread contact is reduced as far as possible, it can be pulled out.
Plugging the oil plug and screw the air filter is then no more effort.
After the compressor is ready for use.
Pulling out the red switch in the middle bring it to life.
One should make sure that the compressor is operated at a dry place with sufficient ventilation.
2.6 KW motor heats up quickly and the heat has to be removed.
In use, the compressor is then - in itself - very convincing.
The print settings are easily adjustable and Readability.
The connectors are exactly in standard size, the accessories listed the other company fits perfectly without air leaks at the connection.
Tires filling with car and bike goes easily and reliably by hand, impressive displays of the compressor but when blowing out the power.
Even from six feet away there were even cobwebs from the ceiling bring, as well as loose dust and dirt.
Even stubborn residues usually soft, if you engaged them in more detail on the fur, clean with compressed air.
per se.
The smaller "in itself" is that the compressor - no surprise - is not exactly quiet.
Not so loud that you would take out ear protection, rather indoors after prolonged operation,
but loud enough that it is annoying to others and so you have to take in of use / time appropriate account.
The large "in itself" is in my TE AC 400 by the engine vibration to the oil plug permanently solves and dances on the opening.
The result is that squirts out at operating oil.
Accordingly I have the compressor significantly devalue and forgiving to clarify the situation with Einhell two star.
/ Update: It took a bit, but the replacement unit zegt not as strong vibrations,
that the plug is released and I go to four stars.