For years I keep my DSLR`s on in a aluminum case, which has now survived 5 Removals and some falls. The Raster foam in the case, however, has suffered over time (the cameras not :-)). Therefore had to be new. This one was about the extent of my suitcase, so ordered. The individual grid cubes can be removed without tools, I call it rauspopeln ;-). For me personally, the only drawback is the self-bottom: when designing the individual subjects and the particles rauspopelt, you always come so to the bottom, where the Abziehklebefläche is. One popelt individual particles out and pulls dabeit the adhesive protective film adjacent parts out, then sticks this on the ground before you want it ... it is a permanent glue and pull back and then paperboard those things on the fingers and on the ground and there where it otherwise does not want :( The last grid foams that I had were without adhesive underside ... zurechtgepopelt, Pattex top, fitted, fertisch! Personal Note ... what to Raster foam annoys me again ... (ok..dafür the seller may nix; -)) ..: You pay for a few grams of foam with a lot of air in it a pig money and throws through Rauspopeln over 70% (in my case) it back in the garbage ... or who need the rausgepopelten foam cubes? Please report ;-)