Shipping undertaken shortly and easily.
Installation proved to be difficult since the Internal USB connection cable (not the 3.0) was almost too short.
I have used my floppy slot for the CR, this is all the way up in the housing. Since my power supply is also located above (the case is a little advanced in age), the way for 2.0 Internal cable was even longer. But it has worked but then even if it sits a little on voltage.
Also one must note that just only two USB 3.0 ports are operated by the CR 2.0 cable slots and with 3.0 connection cable. Therefore be warned, without internal USB 3.0 port, you can not use the USB slots
I did not know this and walked away from "Ok I'll either USB 3.0 or I'll use the two ports just under 2.0".
After a fatal mistake ^^
A description of this would have been useful.
Everything connected properly and it works.
Now I will come to a point of criticism, which was only met due to the constellation of man-machine:
My tower is left of my screen on the desk. The CR sits right at the top. The Red LED permanently catches my eye (Because this never goes out). Due to the large CFI / CFII - slot, and the constellation man-machine, so I do not look only at the little point (as when looking directly on it), but directly on the LED that is exposed by the wide slot and the oblique viewing angle ,
That was so annoying that I once pinched a piece of cardboard, possibly the LED will completely disconnect (annoying Tiiiiiiiiiierisch).
Thus the conclusion:
+ Price
+ Easy installation
+ Fast USB 3.0 speed
+ M2 card will be read
+ Fast reading / writing SDXC / M2 / Micro SD / MS DUO cards (these I have here and try)
+ Fixed seat of USB sticks and the above cards
- Possibly too short internal USB 2.0 cable
- Red LED in the constellation described above
- No Description
I give this product 4 stars and recommend it =)