So really, I looked forward to this use my iPad in bed watching videos fashion!
The product is a little expensive, but the quality is there!
* Part Clamp: The clamp part is good, it has a large aperture, the clamping system is not what there is of most innovative, but it works. For me this is the product loses its 5th star! In fact in my case, the product is attached to the head of my bed, and the rod that runs on the clamping screw is not practical, it is small, and this makes its use a bit more difficult, if the diameter was twice what would be simpler without doubt. In my case I did not just fix it as I lespérais, the clamping jaw has flat trays, covered with a good quality silicone layer, which makes it difficult but maintaining the round on my headboard , round 1/4 in finishes of beds will be a problem to obtain suitable clamping!
* The tubular part: The quality is very good, the tube is easy to use, you can get the curve that you want without difficulty, and maintain with an iPad 3 is very good!
* The ball joint system is easily adjustable and locks in the desired position without difficulty. The holding force is sufficient not to let the iPad lentraîner by its weight!
* The iPad holder claws: The iPad's maintenance system only work without cover, maintenance is very good, easy setting up, use both hands to happen to wear and take off in the iPad claws of the bracket. The plastic seems to be of good quality not deteriorate too quickly in time and thus maintain sufficient clamping quality that the iPad does not move between the three claws.
In short I recommend this product, be careful to have enough space in the place where the clamping jaw on the support will be found, otherwise you can not install it and even less tighten, forget in situations or the head of your bed is against the wall, plated or office wall, etc ...
Delivery: RAS
Packing: RAS
