First of all, the converter now works as it should. I have installed an IDE drive from Sony (from Aldi-PC) in a recent Medion PC Microstar. In addition to the enclosed cables was no further need. The description on the equipment and the manual is a bit poor, something bigger pictures for setting the switch and jumper, and clear labeling would be helpful. I did some tests required because the plug but need to be very deliberate and carefully attached, the tiny jumpers need nimble fingers. In my case the distance SATA connector end and power supply was still sufficient grade, better would be a 90 ° bent terminal. The mounting of the connector would be better to try once before installation. The jumper on the drive way, I have left to master, I do not know if that's important.