Certainly I felt also that it not be sitting next to a "hair dryer".
The blister packaging could be better, but is at least the safe transport from A to B.
Unwrapped is a lot to the fore:
1) The fan itself
2) 4 rubber nipple including a coil replacement. Rubber grommets
3) 4 screws
4) A 5.25 "- power supply terminal with link option and a 3 and 4 pole outlet for fan connectors on the motherboard.
The rubber nipples are hervoragend for quick and easy installation / removal and dampen possible resonances very effective, because the fan then has no direct contact with mounting surface.
The nipples are easily guided through the screw hole of the housing or the cooler and pushed by the fan. Then again pull firmly, touched down the ring, finished. Keeps bommbenfest.
Through the power connector with loop-through device is lost not possibly valuable 5.25 "Connecting the AC Adapter.
Using 3 or 4 pin adapter, at least the speed is read on a motherboard or a fan control. It can not be regulated, but that's not the intention.
The fan rotates at about 1050 rpm. Through the "golf ball" design and the rounded edges fan, the draft is not "broken" and better removed. Thus Luftverwirblungen be suppressed, which is also the soundscape retrospectively.
Fact is, the fan does its job as I expected it: Unobtrusive and well.
Inserting, forget and feel.
There are certainly many "silent" fan, but more often then not offer any airflow. Should anyone need more cooling capacity, can be used to access Silent Eagle 2000 the then rotates twice as fast (just under 2000rpm), but then pushes forward already in the höhrbaren area.
All in all: 5Sterne