The case looks well made. There are provided two mini screwdriver, of which, however, the outer coil could not be solved with the Phillips. So quickly my own mini screwdriver set under the table dusted, the two screws on the front USB connector dissolved and removed with tweezers the front cover. Then come on out of the adapter slide. Solved the two slotted screws, introduced the mSSD diagonally into the slot, pushed down and fixed with the two screws. Sled again pushed into housing, it screwed cover and you're done already the installation.
As I now have the mSSD connected to my computer, it was immediately recognized and also directly install a driver. Then first short sobering: The hard drive was indeed listed under "Devices and Printers", but it was in the Explorer (using Windows7) is not displayed. But all not so bad. Short googled, read a bit, a few clicks and the problem is resolved. The hard drive had to first be initialized and formatted after that.
Instructions: Start> Administrative Tools> Computer Management> Disk Management> Then will be prompted for the initialization. Perform initialization. Then right-click on the new volume and format the hard drive as desired. And then she appeared on already in the Explorer.
So all in all, been a good buy. Can now reflect my notebook internal hard drive and install new ones. The old mSSD from the notebook will be installed in this case here and I have a tiny external SSD as additional storage that fits easily in my Ultrabook Case.
