Basic: The camera works in principle properly, is quite easy to integrate into the network (if you follow the operating instructions / and the rest of the equipment is not on strike), has a (price) appropriate technical equipment, and corresponding variable settings. The greatest difficulties caused less the camera as the security settings of Windows and Internet browsers, which prevent the camera's internal Web site does not appear to control properly.
Application scenario: The camera is filming a determined area in my case and alert me in motion, on the phone, when I'm traveling. The problem is on the one hand the movement sensor. When the camera is set up for this once, every movement is registered, as long as it is turned on. This of course is not appropriate; not I, but the intruder is to be filmed! Remedy can quickly acquire by the camera to a wireless socket (or switch) is connected, via the camera is switched when required, in other words "make sharp". That's never a problem; after a few seconds for the camera to re logged into the network and placed in the operative state. Second problem: If the camera is once turned on, that any stronger light change is (despite matching the sensitivity "interpreted as a movement Add to this that even the automatic switching between day and night mode is perceived as movement gets on a sunny and cloudy day.. one in the worst case churning out emails! So here you should the camera left rather in a recording mode or adjust the times manually. Thus, the camera also works as a monitoring tool in conjunction with e-mail notification, it is also important that the e-mails to a Account will be sent, which in turn forwards it via push to the smartphone. The camera sends the recorded images in movement that is immediately, but minute intervals, the receiving e-mail account, for example. Only the 30 synchronized, so valuable time would be wasted in the burglary case.
