better than garkeine film

Installation of the film is something fitzelig because the recesses are cut precisely. After scanning the film one must not judge - all 3 films were on the right side wrong cut (almost 1 grid boxes difference) If that is laser cut, so must a "sloppiness" simply do not exist. Just as the recesses, the sensors and the camera are very precisely cut out for Home button down and up, the exact alignment of the film is a minor problem.
Contrary to the instructions I have the protective film thus oriented and raised from the bottom of the home button.

The surface of the film is a little rough, which will be hopefully soon. Especially with games where you have to wipe the screen, the finger slides once something bad about the film.
edit: has been after 2 days, so the surface is fine.

What is also striking: on the left edge, the film is to clean, on the right side, however is the film about 1/2 mm to not clean. Sooner or later, may be a risk here that the film detaches or sets including dirt, because strokes here on the small side display and inevitably goes along every now and then at the film edge with your finger.

That the film does not go left and right to the edge should all be clear (descriptive texts, one should be able to read already), because a film adheres times now with the slight edge curved displays the Galaxy Note series not only right on Sseitlichen screen Note the Edge can not foil remain permanently adhere. This was already talking about the Note 2 to here there is no film that goes exactly to the brim. The compromise you have to just live or take any scratches in the glass in buying (or buy another smartphone; D).