I am due to the good recessions out there to buy me the toner.
Very reliable and fast delivery!
For the price Wes is really nothing better!
If the printer mekert at the beginning between the replacement, then you have to reset the level indicator:
To reset the level indicator of the toner, please proceed as follows:
1. Switch off the power switch
2. Open the door and keep the key-press Go / Start and then on while holding down the GO / Start button power switch
3. If all the LEDs light release GO / Start button
4. After LEDs have gone 2x GO / Start button press
5. 1-2 sec. Pause
6. Press 6x GO / Start button
7. Close the flap
-> The level reset and the process is now complete
Have fun
Greeting