Addendum: As promised, the Addendum When using the padded color cartridge.
to put it straight to the point, it remains at full 5 stars! thanks everything is OK ....
Grayscale belongings when setting Print festgstellt, the 1510 mixed this crap type printer PSC secretly still blue color under the black printing (gray side PDF with text). in control of the self-test page then dropped me at the in the color ink cartridge of the LOI from 79 to 70% within 6 pages has slipped. So enraged the original HP out and in geballert the first padded color cartridge from alaskaprint.
the usual game front service door so close same calibration page it must be scanned and processed with scan and copy with not on the computer. then keeps the printer the flap and has only every time you print it out again so the end of the ink is reached LOI = 0 and no capacity is displayed more. Maintenance must be confirmed before each print the Enter / Return key ranges.
(As can ne company with 2 letters really what to think of the people to fill the mess)
regardless expressive ok no dropouts. for my eyes no major color deviations. everything chic.
so let's see ne cartridge from HP with NEM glob ink drinne to me what? about 20 euros cost ...
I get it here each 2x 2x sw and color. with twice as much ink drinne
and it works! even though with those damned confirmation ...
PS this permanent color calibration page comes naturally every time the calibration is not completed with the connected computer dranne. here working drivers and printer hardware PSC 1510 together.
once completed is calm. Ink stored in the cartridge and if the zero then the zero does not matter how much color is in there pumped. remains in the cartridge a kind country code so drinne not operate the cartridges from other regions. The printer remembers each cartridge exchange by means of the individual number of the cartridge.
Color calibration at power comes also with prolonged power outage, so DO NOT use switch and socket
otherwise also comes every time the page. ejmand can confirm the rumor that no side is if the test page (or an old) the printer start is on the glass plate above?