first glance, the product appears sympathetic. The combination keyboard protection makes sense. Only there are several downsides. First it is very unfortunate that the product is designed exclusively for the iPad air2 not for air family. The difference between the two products is only 0.6mm thick lower for 2 but the method of attachment of the iPad held that the establishment of an air model is impossible. This is a pity. Furthermore, the tablet is held only in its upper and free end portion in its lower portion for pivotal movement to paste the key and permit articulation of the protection. Hello risks of dropping if the case opens unintentionally ..... use is practical once we realized that there is no power button stop and that the proximity of the tablet, which care will be taken to connect the BT, which makes the keyboard automatically activated. This one must enter sleep well in one way or another but nothing shows as the light that illuminates briefly when the startup is turned off during operation. The charge causes a green LED blinks when connecting the keyboard to a USB AC adapter (not supplied). The access to the tablet's power button stop is difficult but offset by the fact that extinction can be done from the keyboard. Finally, forget the possibility of using the English spell checker if you want to use this qwerty keyboard but it's the same for others. The key functions are standard and allow a normal and pleasant typing. In short, a whole too cumbersome when closed and leave you a bit confused. Again, the method of fastening and articulation retained seems unwise from the point of view of the tablet's security. A more explicit instructions would also not a luxury ....