But first things first:
I have therefore the brake pads mainly bought because they were cheap and were identified as suitable for my scooter.
As described in relevant forums, I have slowed down slowly so that they do not glaze. From the first test is noticed that the braking performance was incredibly much worse than my old pads. The scooter was in city traffic is more than twice as long braking distance. Just imagine how it would have looked at high speeds. In order to be on the road in normal road traffic, was actually irresponsible and dangerous. So I'm chugging half a day slowly over land.
Meanwhile, I am driven about 120km a week and with them. The braking power is 50km slowly become better after about. After school grades, I would now have a four (sufficient) awarded for the braking power. Satisfactory or even well they still are not.
Therefore, I have expanded quickly and experienced a nasty surprise:
One of the two coverings shows already after this short period of extreme wear and tear. There have solved several chunks, the document is decomposed into its component parts. Please take a look at the photos, there are the places marked.
The provider writes the coverings were "organic". This usually is called either a living or system based on carbon-based. And so these things also act. It gives the impression as if they were caked from horse manure and pencil leads. I could imagine that you need for a price of less than 10, - can not wait particularly good quality Euro. But that it is _so_ bad, I did not expect. I hold the pads for hazardous and can not recommend it.
Instead, I have now installed sintered pads, see here: Delta Braking pads sintered DB2022RDN for APRILIA 125 Mojito Custom Year 03-10 (Front). At the very first braking at 0 km, this sintered pads brake better than the organic EBC after a week and 120km.
Conclusion: do not buy! Leave it alone! Danger to life and limb!