- Switch on printer, PC must be booted up (chip IDs are sent to the PC), power button blinks - Open the printer cover - Stop Press - Cartridge carriage now moves to a small. Arrow in the center of the printer carriage. For example, the black empty the arrow on black cartridge - Stop Press - Make sure that the printer is doing now - he holds back with the arrow, for example, yellow is also the yellow cartridge empty - Stop Press this procedure as long as the printer to run down into the change position (right-hand recess) not push Attention force the printer in this position. If the print head is now in the exchange position: Open cartridge cover - replace only the cartridges that also has the arrow appears - Remove the foil strip on the cartridge - cartridge push in until they snap - close cartridge lid - Stop Press - Close the printer cover - Wait until the printer with the Chipeinlesen is finished and until he has cleansed the Druckköfe
By cleaning the printheads uses ink so it can be the earlier example, the Blue ink cartridge still sufficient ink but now had the cleaning was empty. So if the power button again flashing printer cover and press Stop button. Then appears which cartridge should be replaced.
