To install:
Windows -> CD clean, run Setup, embroidery pure and ready. The drive starts running right away.
Linux Mint -> Stick pure, so nothing is happening first ask google. Then I found right in the first Fund a solution:
[...] There you can upload modified driver in which a call has been removed which the stick is not really made available under the 3:11 kernel. So Downloaded, compile, install, and voila Stick runs.
Operational:
Windows -> I have not looked at the speed, because my computer is connected normally wired. However, I now have the bed (before signal strengths of approximately 20-30%) a signal strength of over 90% and by the WLAN termination wall, run) 2.4GHz and 5GHz.
Linux -> Network Speed amounts at 2.4GHz on 144 Mbit / s. It's okay, but to my surprise I have to say the 5 GHz network and write 867MBit / s what my Lappy really represents a defloration in terms of speed. The reception of the stick is also good here, but not as strong as in Windows. Nevertheless, I have some new neighbors networks became acquainted with =).
Signal strength fluctuated here between 60% and 100% which was mostly the stick in the 90 area.
All in all, most buy recommendation from me. My partner has to now be able to a mitrennen.