Price / performance convinced 2

I write rather rare detailed Renz ions, it wants to do here but since me the often non-product related reviews of other yet very disturbing and I hope therefore to give an impetus to refer in its assessment of the product and not on delivery times or non-existent properties to criticize can be seen clearly in the product description in advance.

Anticipation should be noted that one can expect just under 40 for a pair of speaker stands no High End miracle.
Goods class came packaged with me, since I'm used to from reputable manufacturers sometimes quite different.
The assembly proved to be very easy thanks to a very well-illustrated and understandable instructions and was accomplished over a cup of coffee in a few minutes. The glass shelves are sufficiently stable with a thickness of approximately 4 mm and make a quality impression. The recordings for the spikes are embedded in glass, thus giving the stand a good stability. The stator body is powder-coated sheet aluminum and glossy black. Then I would like to address the plastic parts that have been here so negative because supposedly built on load bearing parts, mentioned. Of course this is not the case. There are the stand body each sowei top down a plastic cap so that the body does not dierekt rests on the glass plates, and two plastic washers to protect the lower glass plate, which should be obvious.
In the stator body, a threaded rod extends which connects the two glass plates to each other. The upper glass plate has a solid aluminum disc with thread, the lower glass plate has a center hole and is secured with a screw at the bottom. Here, the plastic is in the form of a washer is used, as already mentioned for the protection of the glass. On the plastic disc still comes a metal washer so that the mother does not eat into the plastic disc.
Is located on the front of a ca 2mm thick wood inlay, like we know them from cabinet rear walls, and can be exchanged if necessary. A fairly simple gimmick but quite useful in order to adapt to the furniture surface and color.
There are two generous openings for cable entry are even provided with a rubber grommet to protect the speaker cable at the rear.
Is negative to mention, which is the quality of screws and especially the thread of improvement. So each one Spike settled on two uprights not fully tighten, but this may be offset by the turn out of the opposing spikes. Despite this flaw will cost a star, because it is a penny article in the said parts, and it need not be.
Assembled make stand still a very high-quality and sophisticated look and with their 73cm height in optimum ear level for each audience to 190cm height. I mention this because of that because of the amount has been criticized here, although it is specified in the product description.
The speaker stands has often stand on spikes can be used to decouple the speaker from the floor and to minimize so-called structure-borne sound. For people with wood or even carpet flooring it is therefore advisable to put the stand on a granite slab, this one gets for a few euros at the hardware store.
I would also like the so-called fall protection. Granted this course looks anything but beautiful, but the question arises whether this should ever use. Well-known manufacturers offer such an additive to not even, for example, the magnate Unistand 500. On the positive side even to mention the self-enclosed Moosgummipads, among the speakers, or glued directly onto the glass plate, this is well secured against verutschen.
All in all, meet the stand its purpose and give visually a very good figure. I would buy this stand again.