Nevertheless, there still has some defects including one that could prove VERY problematic:
- The mass [and not "weight"], the case adds a significant mass to the tablet,
- The fact that the case may not turn the screen or Turn it [could quickly forget to do it yourself & flinguer its battery]
- The unique position of the tablet, no way to adjust a little tilt,
- All applications do not work well with this keyboard [sometimes it is impossible to write with, you have to board on the virtual keyboard]
- And WORST of all, I joined Yves Richard [in the comments of this case] in the groove in the closed position, touches the screen in the middle [because the groove is not PLATE but has a TIP in the middle ]. I would like to clarify that even when this point, this is probably due to manufacturing defect of the case. Strangely all the photos I could find on the internet, the connection between the keyboard and support [is in 2 parts] is aligned perfectly on my case, this is offset [see photo attached if]. It is therefore possible that it concerns only part of the buyers.
Update: Over time, the case damages the low portion of the tablet. If you tighten the lower bracket, you will hear small creaking because it is this range that serves as balance point for the case. After I do not know if this is the wear of the tablet itself or if it is the case that really did it, but if it was then crunches the tablet should come from all slices, or it is only the lower portion that does this. Is that another buyer can confirm my words?