When you are unpacking the unit via the front a transparent protective film, you can deduct, top right is to a red ribbon, so you do not have to look for a job that will enable the removal.
The unit is part of the repeater and the model EX 2700. The device is attached to a small booklet in which the statements are, as angschlossen. For me especially it was important, so I have interposed the device, so to speak, the Wi-Fi - to enhance signal because my office now is in the far corner of the house and the signal was very weak, by connecting - the intermediary - the repeater have I can expand my signal from one line on the Scala down to 4 strokes - what I want more, I wanted to achieve and works great and is extremely easy to do.
On the front of the repeater is at the top left and right each have a green LED - left for the router connection and right for the device connection. under the LED to the left are two additional lights, POWER LED and WPS show the LED.
The network connection is located below the unit and left outside the on-off button and the WPS button is located. The reset button is down.
The router link LED is green, it means that the connection is super, in yellow, it goes and in red is a bad connection before. Likewise, it is at the device connection.
If one takes a Repeater, it is important that he in the same room as the wireless - is located router. The repeater must be connected to a Steckdoste. There are several different ways, which are illustrated and explained comprehensibly evident in the magazine.
Frequent questions and problems are also clarified in the magazine.
Unit looks classy and is very compact. takes up little space away - OK, a socket is just busy, but I can live with. I have a Fritz Box 7270 - works perfectly - device should be designed for all routers. That increases the speed I could also see how much exactly, I can not say, but I am familiar enough, but it is noticeable, certainly in any case, because simply more wireless signal is present.
