The lateral suitcase handle was slightly eased.
When you move the suitcase rattled something a little screw of 2.5 mm diameter, incl. 2 mm head all 8 mm long.
It was the attachment of the lateral trunk-handle or the loosened grip - cover.
This prompted me to look any further:
The upper handle is attached with two button head screws, the lateral, to be used for loading and unloading grip with just such a screw, a 3 mm or 3.5 mm - Rivet and above. Watchmaker screw.
The rivet attracts a Nietscheibe from special-diameter 7.5 mm.
My concerns:
At full load hang on such a case handle 20 to 23 kg. Due to the use ordinary round head screws must be expected that this - as already the "little sister" - solve gradually by the movement. Even without precise calculation may be doubted that the aluminum frame over the printing of only 7.5 mm - endures wide Nietscheiben. The discs are then possibly drawn through the frame.
We will prevent the. How? Of course, by the use of two crossed trunk belts.
Then we can use the screws crosswise times!
