We were for a long time looking for a wall bracket to hang our TV (32 inches).
After holders of Saturn and Co. because of their price (from 80) but then appeared overly expensive (we want to hang a TV on the wall and not the wall at the TV;)), we're stuck in the end when Ricoo bracket.
The delivery was accustomed quickly through Amazon. The boxed is simple but functional.
To assemble: While it lacks a paper mask (would have been useful), however, the correct drilling distances could be with a little skill and measure and record.
After the plugs were attached together with screws supplied
(You should make sure the screws to assemble 100% in balance,
since no subsequent horizontal correction is possible), just the wall bracket with the already screwed
(Screws and small spacers also settled for convex backs) Hook screen and you're done!
Subsequent adjustment:
All hinges are tightenable, so you should put on after the final positioning of the screen this time.
The adjustment itself is a bit of work, since va the joint for the vertical inclination either very loose or just stuck when the desired position is found, the wall mount but will not adjust as quickly.
Who wants to have the screen depend relatively flat to the wall, should be noted that between the TV and mount 6cm place to stay.
However, since the two arm portions are not of equal length, the part of the swing arm is not centered on the wall behind the part positioned on the screen, whereby the TV is already relatively close to the wall. Less than 6cm distance are thus probably difficult to achieve with other brackets)
The only drawback to the conclusion: Who actually owns any level, should not rely on the supplied mini scale, otherwise the TV hangs in retrospect not exactly guaranteed.