Have the part with a different model number (presumably a newer model, but looks the same) bought in known discounter a week ago. Initially, the installation was a bit difficult because the equipment to be connected (PS3 and an older netbook) have no WPS button. Therefore, here is a brief guide for setting up an access point: - The amplifier into the socket -LAN Cable to the amplifier - Wait 1 minute - Click View on the PC / mobile wireless networks - "Repeaters" is displayed in the WLAN list as an open network -> Connect - Open browser, enter in the address bar [...] - There then enter name and Pw (as in the guide) then you can even name the network and the password set - Finished Note: In the manual it stands could from now on in the setup to change at any time again to what. Does not work for me. The only possible answer in there come again: reseten amplifier -> WPS button for 10 seconds and hold (and then just everything new from the front)
If you have managed that works the part properly! Signal strength excellent even with 3 devices. I'm very satisfied :)