I looked around for a suitable wall bracket for my Epson TW 5910, but unfortunately there is no special wall bracket for this rather large and heavy projectors. While this mount fits here, but I think is more of a compromise. So who does not have two left hands, can hereby suspend the projector easily, only to have to stop tinkering a little. The mounting arms are a bit too short for this great projector, but you can tinker from the accompanying bracket extensions anything, can be used every four mounting arms & screwed. Unfortunately, the focus of the holder is not in the center of the projector, so you can get but very well under control thanks to the adequate setting. There are at all necessary screws + dowels, however, I recommend the Epson separately 4 pointed screws (Allen) M4 to pick for attaching the arms to the projector, because I have not made the most stable impression the screws. Otherwise, it keeps Figures 7 kg of giant Beamer pretty good & stable on the wall. One can use this mount the projector to the left / right and swing up / down. In addition, you can tilt the projector side, therefore all possible settings are possible. Once the holder is on the wall after all, I am very satisfied. So who is happy and wants to tinker save money, which can safely access.