Flat Flounder

First Kure Description: The stand is made of aluminum sheets with 1 mm thickness, which are connected by hinges. (Reference is made to put the notebook) between the base plate and the holding plate, there are two different lengths of supporting plates, which can be placed in three positions, thus helping to bring the laptop can be placed in six different inclinations. Another sheet forms the supports at the bottom of the notebook, they are guided through slots in the retainer plate forward.

With dimensions of 30.6 x 24.0 Haltebplatte of approx cm the stand from 15 inches for laptops is just right.
The outstanding feature is that the folded stand at just about 1 cm at the thickest point is so flat that it can hardly be undercut well. So that it can be taken without any problems in the notebook case.

The stability is surprisingly good given the delicate-looking design, pronounced weaknesses are not recognizable. Sharp edges with injury, there is not, of course, such a thin sheet is always in a sense, "sharp".

I use the stand, because I like to work on the go with an external keyboard and wants to bring the notebook display then to a comfortable working height. And for exactly this purpose the stand is optimal.