Device keeps its promise

I ordered this device Yongnou YN560-TX with 6 flashes Yongnou 560III. From the English manual I could see basic information such as the control unit and the flashes are connected to each other.
Set both units to the same transmission frequency: 1) step:
Press the transmitter in fast key sequence "Mode" and "Zoom", then "Hz / FN", then flashes at the bottom right, the transmission frequency Hz, on left and right circular button Frewuenen can be changed via "Hh / FN" are each left and right digit selected (flashing). Confirm on the center key.
When flash: With "Mode" button to "Multi" - the display on the top left, then press the center key to which display "Hz" blinks on the display right center. About right or left round button frequency - the same as set at the transmitter.

2.) Channel Set: When transmitter "Zoom / Ch" button Press and hold to display blinks then the bottom left "CH" field, then by turn Right circle button below den16 channels, confirm on the center key.
When Flash: button with lightning symbol and "Zoom" buttons simultaneously, the bottom left of the display will flash field "CH", then select Right circle button channel, press the center key.

3.) For flash and transmitter recognize each other, then press eitgleich buttons "zoom" and "Hz / FN" on the transmitter, then the display will flash from all the characters at once, press the flash with center contact.

4. Set group mode: 6x6 modes are available: A, B, C, D, E, F, can be subdivided each in 6 sublevels.
Lightning and transmitter must be set each to the same mode.
At the transmitter displays the group on the left edge of the display under "Gr": A, b, c. By switching Pressing the "Gr" button. Upon changing to the group D, E, F, press the "Gr" pressed a bit longer.
When flash setting the group on simultaneously pressing the "Mode" button and the flash symbol occurs, flashes in the display below the "Gr" field. Over the top and bottom Kreitaste Group A, B, C, D, E, F can be adjusted, the right circle button the subgroup A1, A2, A3 etc .. Confirm on the center key. Unclear, however, is still me, if I can verstelln 36 flashes independently from the transmitter, with 6 flashes no problem.

5. Via the station can now be individually adjusted zoom factor and flash intensity at each flash.