Actually, I assumed that the dLAN 1200+ Wifi ac same technique involves how the 1200+. My experience in practice he suggest to me that this can not be so comfortable.
Both 1200+ communicate without problems among themselves. Also I have no disconnections (PING measured every 60 seconds behind the 1200+ located devices with PRTG).
Unlike the situation with the 1200+ Wifi ac. Here I have repeatedly short interruptions directly to dLan over several minutes - and especially when I use the tensioned with the 1200+ Wifi ac WLAN intense.
I replace the 1200+ Wifi ac against a 1200+ from (so do I replace the devices with each other) wanders the problem with the 1200+ Wifi ac with. So do not it's up to the electrical outlet.
According to the cockpit I have values 350-650 Mbit / s between the three dLan each other (all on one floor).
The firmware currently.
I replace the 1200+ Wifi ac completely against a 1200+ are the crashes also gone.
Conclusion:
Two to three 1200+ tension with me on a stable and performant enough for my purposes Powerlan.
Once I'm using a 1200+ Wifi ac, it is partly dependent on that of the WLan usage to disconnections of several minutes, several times an hour.
The support of devolo could not help me.
Possibly the manufacturer may the error still wegpatchen with future firmware - which would mean yes, that here again the product matures at the customer. ,
Lack information as to whether the problems can be resolved or not, I will need to return the set probably because deficient, and will replace it with a pure 1200+ Set. As Access Point then I take hold forth an old Fritz box.
