The great advantage of the bracket yayago X-Style is that it is absolutely silent. No annoying rattling! The fastening on the handlebar is equipped with two cable ties solved rather poor, Had already two times and had thereby reduce unnecessary cable tie wear, but stops when you use the supplied wide rubber very good and tight. The mobile phone is pushed from above into the holder, fits very well, even have a rubber sleeve around the phone and it fits with the envelope inside. If you use the phone without a cover so you can prevent are included eventual rattling through two mini Klebeschaumpads. According to the description do you do that orange rubber, between the holder and the thick locking screw. Is the phone in the holder so you pull every corner of mobile a corner of rubber, so that the mobile phone is secured again. Small disadvantage here is that the corners are slightly obscured by the PDP through the rubber. Disadvantage is that you when the gum between holder and screw, the holder is not fixed correctly gets. I want to on the side press the button, the whole bracket rotates, that is not so. I Nune asy the rubber under the screw so that the screw is real tight the bracket. The rubber is thereby more stressed because it is stretched more, but after 4 weeks use (drive every day at least 2x6km) I see no exhaustion or wear. Despite these slightly different instructions of the attachment of the rubber, and better maintenance of the holder, I can with some effort turn the Holder. Often they also slipped to 5-10 ° while slightly bumpy rides. Otherwise, the phone sits, here Nexus5, very well in the holder.