The installation is very simple. The screw top and bottom simply untwist the extent until they are almost on the wall. Then fasten mark the points with a pencil, remove grille and with the enclosed adhesive pads (or just screws) the holding plates on the wall. Then fit the rack again and turn up the screws on the holding plates. Finish ... The only difficulty is to ensure that the Haltepads in richtgen distance and are exactly perpendicular to each other. But Taking the points directly to the proffered grid and a spirit level fixed, there are no problems.
Although the pure pinching the grid has already served its purpose, I still resorted to drill and drilled the four brackets in the wall. Thus the grid receives again a little more stability, even if our older daughter shakes it.
The door of the grating can be opened in both directions and has a spring, so that the door will automatically close in the half-open state. Only when the door is fully opened, it remains in position. After it is a metal grid, the automatic shutting is quite connected with some noise. At night the you should close the door so be careful to ensure that the little ones to sleep.
Otherwise, we are very satisfied with the solution that is just right and disfigured neither our steps still hampered us the door in the normal daily routine.
Is recommended!