The set is sufficient to connect a Siemens or Bosch-condenser at a drain-siphon. The quality of the hose should be a bit better, I doubt that it last as long as the machine. The hose clamps shown, with adjustable screws are not included, but only a simple wire terminals! This means that depending on the installation situation any other bells could be necessary. The siphon was already criticized elsewhere. The problem is that the washing machine connection has a 90-degree angles and the dryer connection is being executed. This can lead to the pumped from the washing machine liquor can easily flow in the dryer tube. A lake under the dryer is the result. Remedy creates a check valve that needs to be tinkered in the hose. Another possibility is to connect the dryer hose to other, higher possible location which is not reached by the flowing water. If the dryer is on top of the washing machine, the problem does not occur. At Miele dryers such a valve is installed the way, but also because the hose is not on this list.