1.Eindruck: The Omnitronic looks next to the Techics chic, because he is the same one replica. It is extremely difficult, so quickly brings nothing to wiggle. Ortofon Concorde System it to the supplied system I can make no statement.
Function Test:
The first problem comes with the first test shot. The Turntable is connected via USB to the laptop and via RCA cable mithöre to the mixer, because I üblicherweile about. It comes every now and again a loud hum on, in the direction 50Hz hum, which of course can also be heard in the recording. Placement checked is fine, cable tested fine too. When I connect the unit to the laptop, it is only via USB away. Good to receive can be off the double occupancy and listen via Software Playthrough on the laptop with. The quality is much better than on the old Numark, but who has not unruly hummed when he was simultaneously connected to laptop and mixer. That is case by case Umstöpseln and limits the possibilities already a.
I digitized a few vinyls and so after 20 times using the lift the tone arm has adopted and refused lowering. This is a known issue of the first Technics replicas, so in the 90s sometimes even stood clubs on a tight budget. That does not really give the impression of long lasting quality to me.
My conclusion relates a little to the digitizing vinyl via USB turntable generally. The sound quality of the Omnitronic is light years better than the Numark TT USB.
Basically, however, the subject USB turntable has done for me now. You still take too many noises on (running the needle, etc.) If you then reworked with filters, is so much lost and you have enormous nachmastern for a good sound. I have a very good "normal" turntables and make me the time competently for audio interfaces to digitize it. If you still have a decent turntable, it seems to me that clearly the better option. Since there are very favorable variants, which are used only as a pure Phono PreAmp to variants which have become the Mixstudio by included software. The better options such as Mixvibes U46MK2 or M-Audio Torq software with are just above the rate for the Omnitronic.
