Viltrox adapter for connecting 4/3 (Four Thirds System) lenses on Micro 4/3 (Micro Four Thirds) Kameragehaüse as Original Olympus MMF-2 adapter (accessory) 1
Viltrox adapter for connecting 4/3 (Four Thirds System) lenses on Micro 4/3 (Micro Four Thirds) Kameragehaüse as Original Olympus MMF-2 adapter (accessory)
The adapter would be a really cheap alternative and the basic function is given. FT lenses work on my PEN E-PM2 and to my OM-D E-M5. There are problems yet. With the 35mm macro I have a unilateral shift of depth of field and a one-sided blur, which does not occur on my E-620. Through Notes on the Web, I have resorted to the calipers. My adapter has at its thinnest point only 19.05mm thick and thick on the opposite side 19,25mm. On the one hand this is a total lack, because it should be 19,35mm, on the other hand, the lens is at least by 2 tenths of a millimeter wrong to the sensor. Now you know so that's why the Olympus adapter are so expensive, because in addition to the Olympus Pharmacy surcharge, there is also a good deal of precision and quality, which unfortunately is not going to get here. Since no uniform sharp images are possible with this adapter, I have no other choice but to send it back and discourage a purchase, or exchange until he is found a suitable product. For the purposes of their own nerves and the compensation to the but certainly not worth.
A vice exchanged by the dealer Adapter (despite notice my part, what level is crucial and I usually forgo an exchange) is worse thinnest point: 18,9mm. Opposite: 19,3mm. This means 0.4 mm canted surface. I therefore subtract also the second star and the purchase rate from urgently!