Stark disturbing however is the solid hotshoe. This is also the reason why I have the holder returned and finally decided on the Phottix Varos screen Eiger. I have 3 Canon flashes, it is one with master function and the remaining with the slave function. So I can also use the master flash unleashed with E-TTL2, I have this one cable, which is equipped with its own flash foot and 1/4 "threaded receptacle. Thus, I can not use on this holder for this combination. I have then with a flash bracket work, so I can use umbrella and flash in combination with the holder. Far too expensive. For all other manufacturers can remove the hot shoe and then work with a threaded foot. This may sound far-fetched. But when I'm working with screen, use I unleashed the flash. So I have to premeditate like me to connect manufacturing. Do I use herewith only slave flashes, I have no problem, then work to the holder. But even with a photocell I have a problem here. That is why true the statement in some Reviews "universally applicable" not.
The connection of the holder on stands of all kinds (Photo and lighting stands) works because 1/4 "- 3/8" threaded or 5/8 "Spigot are Sorry but without instruction..
Displeasure gave me the lateral clamping the flash foot. Here you have to be extremely careful that one achieves this not too far, otherwise the flash fall out. But this is solved similarly with the other manufacturers, so you may not perform as co-point of this.
The Phottix Varos screen Eiger costs Although about 7, - more, but makes more sense.