Already when unpacking let the size of the carton not bode well. The box is actually quite small and only contains a terminal block. Apart, that for some time now to connect cables no luster terminals but WAGO terminals used a single terminal block for 4 cable is dimensioned quite scarce with 3 veins. Otherwise, the processing of the box looks quite robust. The cable entries are sealed with rubber inserts, which are compressed by a locknut and so closely to rest against the cable.
In the actual installation this succeeded only with great difficulty, even with the underground cables with 3 * 1.5 mm² wires. One should use a lubricating grease to introduce the cable, since the rubber otherwise like twisted. With a 5 * 1,5mm² underground cables must be not think about it, having to push the sheath of the cable through the rubber seal, it just does not fit, even if the cable has a diameter of only 12 mm. When wiring the space problems confirmed. I have replaced the Lüsterklemme against WAGO terminal blocks and had some with pointed pliers wiring vornhmen to get 3 terminals in the small wiring space.
Finally, I got myself a different product in a hardware store, which is designed differently. Here, the wiring space is under a bolted cap offers loads of space. There too the Manufacturers Cup Grease has attached at the right cable entry and cable ties for strain relief, which I also missed with this product. I use the boxes now only to Verbidnung two cables, here the space for wiring is adequate and the Box serves its purpose. I would buy it but no longer because it gives me better designs.