To clamp stand with enough weight to larger objects have an expansive weight -
- Ruler on the stand and in the accessories to adjudicate on the to magnify objects to variables to represent well.
- When you have to adjust as with normal microscopes also only a rough and then make fine adjustments later, this succeeds relatively well with the stand.
- The fine-tuning is performed on the microscope itself, the screw this is VERY difficult to move, so the microscope is shaking heavily, may be postponed.
- During fine-tune the internal camera from the left to the right, so to magnify object must be herwandert and thus realigned back and.
- The setting of the brightness of the lighting is poor, the smallest setting is too bright for easy mirroring things make a little darker switches off completely, the same "jump effect" is also available in higher turn.
- For the fun of it, and because my USB eyepiece is defective, I view this microscope through my normal lenses can give children to show the Saturn. Here, then noticed that there already are some slight pixel problems, say the resolution is not high enough, but the children have the rings yet fallen. The same effect occurs if you set the maximum zoom level, it appears instead of crisp images pixelated partly, but "only" 5M camera is located on the.
Windows 7 64-bit:
- Software receives from me a smooth-school grades. 5 The reasons for this a lot, as an example of the lack of file formats, the "calibration" that none is actually correct, but should only synchronize the monitor image to the camera image, and the switches also changed between different monitors displayed is , It lacks the ability to adjust all controls of the camera by hand, such as sharpness, gamma, color adjustment, saturation, ...
- Without the included software, only with the drivers, I have the camera may not respond, but also may be due to my lack of Windows knowledge.
- Following Fritz box and USB through wireless forwarding did not work, no idea why, I miss just the Windows log files.
Linux (hostname) 3.2.0-4-amd64 # 1 SMP Debian 3.2.51-1 x86_64 GNU / Linux:
- Device Detection: Bus 001 Device 003: ID 0c45: 6353 Microdia
- Ran flawlessly used after plugging, as software guvcview, all settings as desired present works themselves as "Cam".
- Original software Wine works, but with the same restrictions as under Windows. 7
- Following Fritz box and USB through wireless forwarding goes without restrictions.
