Front Top - back flop

I had read countless other reviews about the Invisible Shield and also about the fact that the back can be applied perfectly impossible. Well I thought maybe the others were awkward or had too little time for it. So I ordered it and I was surprised when applying the screen overlay.

You had to look very closely that the film on the display to all corners had the same distance, so that one does not notice that a film is on it. However, this was complicated by the spraying of liquid slightly. The film was once placed on the screen, this could not at all easy to move to correct, man had to completely mask off again and start the whole spray adhesive procedure from the beginning. I asked for a lot of time and needed 3 tries before the film pasted correctly. Now I knew, however, what lay on its back on me!

Overall, I was sitting around 3 hours on the Invisible Shield and my iPhone until I gave it up.
It is impossible to stick all 4 corners invisible! Although an attempt is made this corner iphone-in-the-hand-push technology, so sticking a corner, but totally wrong, since one does not see how you glued. And also she went off again as soon as they tried to get the bubbles out of the back.

The worst was that the Backing not exactly fit to the iPhone. I do think that such a film should be proportional to the device, so they THAT CONDITION invisible! But that was not the case. When Backing starts from the camera hole and the side volume control including mute button, because they are cut in the film. When I now the film anklebte precisely at these points, the film went on the front left up to half of Alustreifens, on the right but has the complete covering. So if that should not be visible, I do not know it well. I had several times tried to correct it, but it was futile.
And after the whole assembly and masking lots of dust and booze came to the film and this gets you guaranteed never to leave. Finally, I went from the spray ... great, I thought to myself, where we are taking you forth something, no extra again to order a film? A few drops of liquid were still in there, because I mixed add a glass of water and tried it one last time. Due to the booze and the annoying corners, I decided to cut them. Because the original spray was no longer present, now a lot of little bubbles and 2 great stayed with me behind left.

Even though I have now written so much, I wanted to describe in detail the experiences I have made with the Invisible Shield and stands as a conclusion that I would never order again display and backsheet. If, then only the display film. By the way one sees the film very well, if you've seen the iPhone previously without that structure is completely different and also dirt and small threads to collect the clothes at the edge of the film and especially with the round button front.