Some data from the supplementary sheet of the LED strip:
Power Consumption
14.4 watts per meter (5 feet 72 Watt) is included, since no power adapter please ensure that you connect to a sufficiently strong power supply (12 V 6A)
Brightness
720 lumens per meter
Light color
3000 Kelvin
The Heilligkeit is clearly sufficient to brighten the forecourt of the garage. Since the LED band only indirectly illuminated, this is of course quite a bit of brightness lost.
I had tested the LED strip before mounting in the home, and have to say that making a room already quite bright.
The light color is also very pleasant. 3000 Kelvin is the light color, which is slightly cooler than standard warm white. This effect but I would rather describe it as a positive, it lets light seem more modern.
The tape is waterproof as stated. The back side is self-adhesive. I can not write to the negative adhesion. The thought from the beginning very well, despite the temperature around zero degrees outside ... of course, is also important, what surface the tape is to be adhered. In my case it sticks to metal, since the adhesive force is of course good.
The LED band are two separate connectors settled LE LED strips connector, connector between monochrome stripe, 8mm width, Pack of 2,
and one LE of these connectors connecting monochrome LED strips, terminal strips and intermediate adapter, 2 pieces in jner pack
So you can share the tape several times and then connect to these connectors without soldering again and then operate with a power supply.
Here but note that only every 3 LEDs can be cut. But there is also evidence of small scissors are displayed on the LED band.