Have wavered long, how much it is worth to spend on films. Due to many recommendations on the net I have taken up but slightly more expensive compared atFoliX films. The scope of delivery also makes a good impression at first. The detailed instructions and the packed dust-free microfibre cloth are very helpful. However, it falls short of the films themselves. The display film is in the delivery of three layers, which are dissolved during the assembly successively. First, the bottom sheet on the adhesive side of the display film, later the upper protective film on the actual display foil. So far so good. To remove the film from the adhesive side, there is at the top of a tab at which the adhesive film is to be peeled from the protective film ... However, absent in the other two films a perforation. If these were present, they could, as it says the manual, the tab bend backwards and pull the bottom sheet with the flap of the adhesive layer of the film ... I tried until I realized the lack those very perforation. Finally, I cut off the tab. The problem is that the display foil is now bent backwards at the upper edge so that they quasi itself pushes up from the edge of the display. In bottom of the screen, the film fits superbly. The fit makes a very good impression. In the field of ear, however, the film is sitting not flat. You just simply does not stick on the display! So I am not happy! I did not have a nerve to try one of the other two supplied foils. But even if. I paid for 3 films and the first ever non-sticky as it should. I've seen better with Mumbi films and because you get the same price 6 pieces. Although I can imagine that the atFoliX much better would haptic when this problem would not be with the tab.
PS After this evaluation atFoliX immediately contacted me and sent me 3 new films. The second film works much better. Conclusion: Quality fluctuations in production may occur. But that is offset by a first-class service!