Unpacking and setting up takes 35 minutes. It would be faster if the instruction is not "improvement" would be. Not only that Bosch follows in the footsteps of other manufacturers and guidance for many other languages makes, the print quality is sometimes very bad, as when the toner runs out. Even the download of the guide as a PDF, the frequent language version. It really costs nothing to make a separate file for each language. PDF. You always have to scroll up and down a few pages in the construction. But there is no real difficulty. Why you inside einstecken- the hose and screw it to the base plate, anyway I do not understand. Should this make the user feel be given that he can actively what screw together? Base plate can be this thin plastic cover not really call. What continues to fall negative, is the plastic housing. It is not stable. I would like to pay 20 euros more, if if there were reinforcements and a stronger wall. At the same 2 grip recesses on the housing would have been very handy. And that goes! Place is within enough. So you have to be afraid that you quickly a fraction enters the housing times. Especially if it is not permanently installed. The rest is made up quickly. Apart from the mother of the hood, it requires a 10-key, they can so do not adjust with the enclosed tool. The real work, however, is a delight. It cuts precisely and cleanly, the stop is exactly. The sliding table is really no play and moves velvety. Is really times a game in there, you can readjust a lot of things. The angle stop slackens not in the guide, as with all DIY Boater to about 300 euros. Like other buyers, I did not have to adjust to, it was 90 ° aligned the riving knife. The angle setting is accurate. Four wood with 45 ° resulted in a perfect setting. The blade adjustment is easy to adjust and accurately. The extraction with an industrial vacuum cleaner is sufficient storage. Conclusion: For the money, I know nothing better. A good table saw, but which may be in some respects improved.